Plastic tube flowmeters have wide ranges of applications Posted by : admin / Posted on : Dec 02， 2022

Plastic tube flowmeters have wide ranges of applications. They are mainly used for measuring various fluids. These flow meters can be made of different materials. Some are suited for water, while others are best suited for chemicals.

The basic flow meter is comprised of a float and a tapered tube. The material of the float can be stainless steel, bakelite, or hard rubber. It is important to select the appropriate float material according to the chemical properties of the measured medium. For example, caustic chemicals tend to attack metals. Therefore, metal float flow meters are suitable for liquids that have corrosive characteristics.

In the case of a float flow meter, the size and type of the float can change with the flow rate. The flow meter also has an approximate linear scale, which helps to easily read the value of the fluid. It can measure the flow rate of liquids with a high degree of accuracy and reliability. In addition, a float flow meter can be equipped with an inline needle valve, making the measurement of liquids in closed piping systems easier.

The float and the tapered tube are connected to the pipeline by a thread or a gland. The float is mounted vertically or horizontally. This makes the float flow meter very simple to maintain. If a float is damaged, the float can be replaced. The float can be removed by turning it over or lifting it. The float can also be used for calibration. A float can be placed in a glass or metal tube. The float is supported by an upper and lower stop, which is mainly made of cast iron.

A flow converter consists of a four-bar linkage mechanism, an electrical processing unit, and a magnetic balance. It receives the displacement signal of the float from the float sensor and converts it into a standard current signal. It also displays the flow value on the flow dial. It can be used for flow control, totalizing, and recording. It is compatible with most types of industrial fluids. It is suitable for use in agricultural, chemical, and industrial applications.

The main component of a float flow meter is the float. It has a very high accuracy, reliable performance, and is easy to operate. Besides, a float flow meter has a wide range of uses. It can be used for both corrosive and non-corrosive fluids. Moreover, it can be used for measurement of gas. It can be operated remotely, making it a useful instrument for gas piping. Its price is low, so it can be used in a variety of applications.

The two major types of float flow meter are glass tube float flowmeter and metal tube float flowmeter. There are also a number of specialized types. For example, there is the indicating metal tube float flow meter, which is commonly used for measurement of strong corrosive fluids.