What is the maintenance of the electrode of the electromagnetic flowmeter? Posted by : admin / Posted on : Mar 15， 2021

1. Before using the electromagnetic flowmeter, calibrate the electromagnetic flowmeter with a standard pH solution. After calibration and before operation, everyone must pay attention to clean the electrode of the electromagnetic flowmeter with distilled water first, and then clean the electrode with the test solution again.
2. If the electromagnetic flowmeter is not used, when removing the electrode of the electromagnetic flowmeter, everyone should be careful not to let the touch sensor of the electrode collide with a hard object, otherwise as long as there is damage, it will affect the use of the electrode.
3. After using the electromagnetic flowmeter, you should put the electrode of the electromagnetic flowmeter on the sleeve, and put less saturated solution in it, as long as the bulb of the electrode is moist, it is enough, but remember not to put it in distilled water soak.
4. Normally, keep the electrode clean, and don't let the output on both sides of it have a short circuit, otherwise it will make the measurement inaccurate and affect the use of the electromagnetic flowmeter.
　　 In fact, there are many ways to maintain the electrode of the electromagnetic flowmeter. You should pay more attention to it during use. Don't cause the electromagnetic flowmeter to fail to work normally in the future because of your little negligence.